Motovario Gearboxes Worm Gear

MOTOVARIO GEARBOXESNMRV and NMRV POWER worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility. The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.Certifications Available: ATEX 2GD/3GDWarranty: Two years from date of delivery.CharacteristicsRangeDownloadsPRODUCT CHECK LISTRequest more infoNMRV – Sizes: 025-030-040-050-130-150NMRVpower – Sizes: 063-075-090-110Available versions: fitted for motor coupling, with input shaft, with torque limiterPower up to 18,5 kWCases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast ironRatios between 5 and 100Max torque 1.550 Nm and admissible radial loads max 18.000 NAluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantityWorm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)Ground worm profile ZI (UNI4760)Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843Available with pre-stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for NMRV-P SeriesWorm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, NRV+NMRV, NRVpower+NMRV, HA31+NMRV, HW/NMRVpower, IHW/NMRVpowerOptions: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade oil, filling/drain/breather/level plug, reinforced output

WORM GEAR MOTOVARIO NMRV and NMRV POWER worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility. The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.Certifications Available: ATEX 2GD/3GDWarranty: Two years from date of delivery.CharacteristicsRangeDownloadsPRODUCT CHECK LISTRequest more infoNMRV – Sizes: 025-030-040-050-130-150NMRVpower – Sizes: 063-075-090-110Available versions: fitted for motor coupling, with input shaft, with torque limiterPower up to 18,5 kWCases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast ironRatios between 5 and 100Max torque 1.550 Nm and admissible radial loads max 18.000 NAluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantityWorm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)Ground worm profile ZI (UNI4760)Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843Available with pre-stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for NMRV-P SeriesWorm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, NRV+NMRV, NRVpower+NMRV, HA31+NMRV, HW/NMRVpower, IHW/NMRVpowerOptions: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade oil, filling/drain/breather/level plug, reinforced output

MOTOVARIO GEAR NMRV and NMRV POWER worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility. The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.Certifications Available: ATEX 2GD/3GDWarranty: Two years from date of delivery.CharacteristicsRangeDownloadsPRODUCT CHECK LISTRequest more infoNMRV – Sizes: 025-030-040-050-130-150NMRVpower – Sizes: 063-075-090-110Available versions: fitted for motor coupling, with input shaft, with torque limiterPower up to 18,5 kWCases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast ironRatios between 5 and 100Max torque 1.550 Nm and admissible radial loads max 18.000 NAluminium units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantityWorm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)Ground worm profile ZI (UNI4760)Loading capacity in accordance with: ISO.14521, DIN.3996, BS 721, AGMA 6034, ISO 6336, DIN 3990, DIN 743, ISO 281Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843Available with pre-stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for NMRV-P SeriesWorm gear reducers are available with diffferent combinations: NMRV+NMRV, NMRVpower+NMRV, NRV+NMRV, NRVpower+NMRV, HA31+NMRV, HW/NMRVpower, IHW/NMRVpowerOptions: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade oil, filling/drain/breather/level plug, reinforced output

MOTOVARIONMRV NMRV worm POWER and gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility. The new Power series NMRV, also available as an integral compact helical/worm options, has been designed with a view to modularity: the low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.Certifications Available: ATEX 2GD/3GDWarranty: Two years from date of delivery.CharacteristicsRangeDownloadsPRODUCT CHECK LISTRequest more infoNMRV – Sizes: 025-030-040-050-130-150NMRVpower – Sizes: 063-075-090-110Available versions: fitted for motor coupling, with the input shaft, with torque limiterPower up to 18.5 kWCases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast ironLi Ratios between 5 and 100Max torque Nm, 1,550 and admissible radial loads max 18,000 NAluminum units are supplied complete with synthetic oil and allow for universal mounting positions, with no need to modify lubricant quantityWorm wheel: bronze Cu Sn12 Ni2 (UNI7013-10)Ground worm profile ZI (UNI4760)Loading capacity in accordance with ISO: 14521., DIN 3996, BS. 721, RELIGION 6034, ISO 6336, DIN 3990, DIN 743, ISO 281Size 030 and over are painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843Available with pre-order stage unit: HA31 for NMRV040/NMRV050, HW 030/040 for P-Series NMRVWorm gear reducers are available with diffferent combinations: NMRV + NMRV, NRV, NMRV + NMRVpower + NRVpower + NMRV, NMRV, NMRV, HW + HA31/NMRVpower/NMRVpower, IHWOptions: protection cover, torque arm, output flange, output shaft kit, torque limiter, viton oil seals, low/high temperature and food grade